Woodstock SHOP FOX M1054 insert, Manual Insert

Page: 15 / 56

-5-
M1048 10" x 18" Metal Cutting Bandsaw
IN
TR
O
DU
CT
IO
N
Control Panel
A. Coolant Pump Switch:
Turns the coolant
pump ON.
B. EMERGENCY STOP/OFF Button: Interrupts
power to the system and turns the motor
OFF . Twist the button until it pops out to
re-energize the system. Also works as a stan-
dard OFF button.
Note:
The bandsaw has an automatic shut-
off (limit switch) that turns the motor and
coolant pump OFF at the bottom of the
cut.
C. START Button:
Turns the motor ON and
begins the sawing action.
D. Power Light:
When lit, indicates that system
is energized and machine is ready to oper-
ate.
E. Feed Rate Dial:
Fine tunes the feed rate by
controlling the hydraulic valve. Range is from
0 being slowest to 9 being fastest.
F. Feed Control Knob:
Turning the knob to
the left lowers the bow at the feed rate you
have set. Turning the knob to the right locks
the bow in position.
Figure 2 . M1048 control panel.
A
B C
D
E
F