S
Stteep
p 2
2..
Remove the fence and apply a strip of masking
tape along the the rail
3
⁄
16
'' in from the front edge.
S
Stteep
p 3
3..
Using the zero mark as the starting point and the
masking tape as a guide, apply the adhesive scale
to the rail. F
Fiig
gu
urree 2
23
3.. Burnish the scale into place
with heavy thumb pressure.
-16-
Shop Fox
®
Fence
F
Fiig
gu
urree 2
22
2.. Placement of the scale.
F
Fiig
gu
urree 2
23
3.. Attaching the scale.
G
G.. S
SC
CA
AL
LE
E//IIN
ND
DIIC
CA
AT
TO
OR
R
The self adhesive scale (#56) and hairline indica-
tor (#40) provide fast and accurate fence position-
ing. To mount the scale and indicator, proceed as
follows:
S
Stteep
p 1
1..
Locate the zero point of the scale by measuring 2''
to the left of the blade and mark the rail. F
Fiig
gu
urree 2
22
2..
S
Stteep
p 3
3..
Continue to rotate the axle until the fence is square
to the table. Tighten the setscrew.
S
Stteep
p 4
4..
It is advisable at this point to recheck parallelism
between the fence and the blade. If further
adjustment is required, continue to check back
and forth between parallelism and squareness
until both are adjusted satisfactorily. Remember
to adjust with the setscrews loose and measure
with the setscrews tight. This procedure may
seem a bit tedious, but this is a one time adjust-
ment that, if done patiently, will ensure excellent
performance.
F
Fiig
gu
urree 2
21
1.. Adjusting the left roller axle.
Rotate nut to rotate axle
