-3-
D4088 Lathe Attachment Instructions
Sandpaper
Workpiece
Never wrap sandpa-
per around a moving
workpiece, or your
hands can be pulled in
causing a an entangle-
ment injury.
EYE/FACE PROTECTION.
Wear eye protection and a face
shield during all turning operations.
RESPIRATORY PROTECTION.
Always wear a respirator
when using this tool. Wood dust may cause allergies or
long-term respiratory health problems.
AVOIDING ENTANGLEMENT.
Keep long hair and loose
clothing such as sleeves, belts, and jewelry items away
from the workpiece and chuck.
WORKPIECE CONDITION.
Always inspect the condition of
your workpiece. NEVER turn stock with knots, splits, and
other potentially dangerous conditions. All glued joints
must have high quality bonds that will not fly apart during
operation.
MOUNTING WORKPIECE.
Before starting, be certain the
drive and spur centers have been properly imbedded into
the workpiece, and that the table is locked in place.
USING TOOL REST.
NEVER attempt free-hand turning, you
must always support the chisel on the tool rest, and keep
the tool rest gap to
1
⁄
8
" to
1
⁄
2
" when ever possible.
TURNING SPEED.
Select the correct tuning speed for your
work before starting the drill press.
USING SHARP CHISELS.
Keep chisels sharp. Dull chisels
require more force to cut, causing tool chatter and
grabbing hazards.
MATERIAL REMOVAL.
Attempting to remove too much
wood at once may cause the workpiece or chisel to eject
causing severe injury.
Damage to your face, lungs, and eyes
could result from using this tool with-
out proper protective gear. Always
wear a face shield, safety glasses, and
a respirator when using this drill press
lathe attachment.
Operation Safety
Read and follow these safety precautions:
If you have never used this type of machine or equip-
ment before, WE STRONGlY RECOMMEND that you
read books, trade magazines, or get formal training
before beginning any projects. Regardless of the
content in this section, Woodstock International will
not be held liable for accidents caused by lack of
training.
NOTICE
No list of safety guidelines can be
complete. Every shop environment is
different. Always consider safety first,
as it applies to your individual working
conditions. Use this and other machin-
ery with caution and respect. Failure
to do so could result in serious per-
sonal injury, damage to equipment, or
poor work results.
loose hair and clothing
could get caught in the
spinning workpiece and
cause serious person-
al injury. Keep loose
clothing and long hair
away from moving.
