bolt, and tighten the bolt until secure.
11.
Install the extended left-side blade guard, as shown
in
Figure 5
.
12.
Remove the guide assembly and the blade guard
from the original guide post.
13.
To keep the small parts from falling out of the guide
post bracket, install the extension guide post from
the top of the guide post bracket by loosening the
original guide post and lowering it as you guide the
new post into place.
14.
Attach the guide assembly (
see Figure 5
) and the
extended blade guard to the extended guide post.
15.
Install the 105" bandsaw blade, tension it prop-
erly, test the tracking, and adjust the blade guides
according to the manual instructions.
16.
Check the alignment of the bandsaw wheels accord-
ing to the manual and align if necessary.
17.
Replace the power switch assembly.
If you need additional help with this procedure, call our
Technical Support Department at: (360) 734-3482.
Figure 6.
W1706 Bandsaw with the D3348
extension block installed.
Figure 5.
Extension block components.
New
Left-side
Guard
Extended
Blade
Guard
Extended
Guide
Post
