14
ASSEMBly GG 78
Work Rests (fig. 5, Nr. 4)
In order to assemble the work rest losen the lower screw
of the wheel guard. Fix it with this screw in the upper
slit, while mounting below the hex bolt M5 with a washer.
The distance between grinding wheel and work rest shall
not exceed 2 mm.
Spark Guards (fig. 6)
Install the spark guard with a cross-head screw and a
washer to the wheel guard. The distance to the wheel
guard should not exceed 2 mm.
Wheel Guards (fig. 7+8)
Install the eye shield with 2 cross-head screw n M4, 2
washers and 2 hex nuts to the clamping plate.
Lead the handle into the clamping plate and fix it with a
flat head screw M6, a washer and a nut.
Fix the complete unit to the wheel guard with U-handle,
hex bolt M8 and a washer.
The guard is individually adjustable, as to protect the
users eyes during grinding process.
fig. 5
5
1
1
6
6
2
3
3
4
4
9
8
7
fig. 6
fig. 8
fig. 7
