Page 13
Due to continuous product research and development,
the information contained herein is subject to change without notice.
www.stoddart.com.au
www.stoddart.co.nz
Troubleshooting
Task Type - (O) = Operator
(T) = Technician Task
Problem
Possible Causes
Task
Possible Corrective Action
Unit not heating
Unit not turned “on” at the
power socket
O
Turn power to “on” at the power socket on the wall
“On/Off” switch on power
socket
O
Switch on power “on/off switch” on the control
panel
Thermal Cut out tripped
O
Call service technician
Oil too Cold
Temperature requires adjusting
O
Adjust Thermostat
Oil too Hot
Temperature requires adjusting
O
Adjust Thermostat
Oil not Hot
Element failure
T
Test & replace the element if necessary
WARNING
Technician tasks are only to be completed by qualified service
people. Check faults before calling service technician.
• If any faults/issues occur with the unit, follow the below troubleshooting procedures
• If the troubleshooting procedures do not correct the problem, contact the Stoddart Service Department
Cleaning and Maintenance