Step 9: Disassembly
Step 10: Packing the tent
Step 8: Secure guy lines
1) Secure tent using all guy lines and stakes.
Tent must be secured for proper function.
1) Spread tent flat, distribute evenly.
2) Fold into quarters not to exceed the length
of pole bag.
3) Lay pole bag at opposite end from door.
Tightly roll bag, skin and fly forcing air
through unzipped door.
4) Secure with ties and place in carry bag with
stakes and accessories.
5) Tent must be clean and dry before storage.
Store off concrete floor.
Be certain campfires are extinguished.
Dispose of trash appropriately.
Dimension A should
be close to but not
exceed the length
of the pole bag.
A
Fold tent into a
rectangular shape.
Front of tent
(door unzipped)
Step 6: Stake tent
1) Stake down the tent by inserting a stake
through the stake loops, located along the
perimeter of the tent.
2) Make certain the tent floor is pulled out
evenly and tightly.
3) Hammer the stakes into the ground at a
45˚ angle using a hammer or mallet.
Tent appears as shown.
Step 7: Attach Fly
CTC181207 06/17
1) To take down the tent, disassemble in
reverse order.
2) Remove accessories.
3) Remove and fold fly.
4) Be sure to leave doors and windows
unzipped to avoid zipper damage.
5) Remove stakes with hammers or stake
puller. DO NOT pull on tent.
6) Carefully disengage poles from fast feet.
carefully push pole away from you through
the hanger to minimize risk of damage to
tent or poles.
7) Keep stakes in bags provided.
1) Unfold the fly.
2) On the underside of the fly, locate the pockets at the top of the vestibule doors.
3) Insert the ends of roof (B) into the pockets. Fasten the fabric ties at the centre of the fly around the pole.
4) Place the fly over the tent, right side up.
5) Attached the buckles at the tent corners.
6) Fasten vestibule doors and stake in place at front and back of tent. Vestibule doors and window panels may be opened as desired.
