13
EN
Operating Instructions
PROBLEM
CAUSE
REMEDY
The device does not switch on and the power
switch does not light up.
Power supply problem.
Connect the device to a functioning power
socket and switch it on.
The fuse is broken (WOZ3000/6000).
Replace the fuse.
The power adapter is broken (WOZ100).
Try a different power adapter (making sure that
the adapter is to the correct specification).
The device operates, but its performance is
poor
The ceramic plate is dirty.
Clean the ceramic plate:
The device is operating but not producing
ozone.
The ceramic plate has reached the end of its life
or is broken.
Replace the ceramic plate:
Loud fan noise.
The prefilter is dirty/clogged.
Replace the filter.
The machine is behaving strangely.
The software has hanged.
Perform a factory reset..
The machine settings (e.g. timer) are incorrect
The machine has been set accidentally.
Contact your local dealer after you have worked through the above troubleshooting list or if your project requires a service.
NOTE:
Register your product at
www.warranty-
woods.com
to benefit from the special Wood’s
offers available for your product.
Take a look at
www.woods.se
for more information.
Warranties
2- year factory warranty covering workmanship. Please note, the
warranty is valid only on presentation of a receipt. The warranty is
valid only if the product is used in accordance with the instructions
and safety warnings in this manual. The warranty does not cover
damage caused by incorrect use of the product.
CUSTOMER SERVICE
Always use original parts.
Make sure you have the following to hand when you
contact our customer service team: Model designation,
receipt and serial number.
Note that all information, safety instructions and
technical data in this manual may be amended.
Troubleshooting
Summary of Contents for Airmaster WOZ100
Page 2: ...2...