Step 1: Verify package contents
Tent: 1 each
Step 2: Assemble poles
1) Assemble steel poles by placing tapered
ends into the adjacent sections. Assemble
fiberglass poles by placing sections into
the metal ferrules.
Eleven poles are provided:
Rainfly: 1 each
Mudmat: 1 each
Step 3: Spread out tent and assemble roof
1) Spread out the then flat, floor side down.
2) Use the illustration below and the line drawing on page 4 as a guide.
3) Insert a roof pole (B) through the centre sleeve running from side to side, forming arch.
4) Insert pole (A, Orange) Under pole (B) through the pole sleeves at the middle of the tent front to
rear. Place the pole ends into the orange coded opening of the pre-attached connector.
5) At the front and rear of the roof, insert remaining poles (B) through the sleeves and through the
pre-attached connector at the centre of the roofline. See below.
6) Position eave poles (C) along the sides of the tent. Insert ends into the pre-attached connectors
at each corner. Insert middle roof pole ends (B) into the connector on the eave poles.
7) Make certain all poles are locked with r-springs snapped into place in the slot on the
connectors.
CTC161410-2(076-6071-4)
ASSEMBLY INSTRUCTIONS
Gear Loft w/TP:
1 each
1) Using leg pole (D) with affixed connector, at the front corners of the tent insert the top of
the pole into the bottom of the corner connector on the tent. Place the bottom of the pole
into the fast feet at the corner stake loop.
2) Repeat for rear leg poles (E).
3) Attach the plastic clip at mid-wall to the leg poles. Attach clips along the eaves to eave poles.
Tent Stakes: 14 each
Step 4: Raise the tent
Divider: 1 each
3 each (B) Black Roof Poles (forming arch)
1 each (F) Fly Pole
2 each (D) Front Leg Poles
2 each (E) Rear Leg Poles
1 each (A) Top Roof Pole (Orange)
Connectors: 8 each (total)
( Pre-attached)
3 way - 4 each
3 way - 4 each
CTC161410-2 8/16
IMPORTANT NOTES:
* Assemble your tent before camping to become
familiar with the assembly.
* Two people are recommended for setup.
* Select a clean, level area for the campsites, free
of debris and sharp objects, away from any
natural watercourse.
* Use of a ground cloth is recommended to
prolong the life of the tent floor and provide
additional insulation and moisture protection.
* To prevent damage to the zippers, unzip the
doors and windows of the tent prior to
disassembly, allowing air to move freely.
* Seam-seal the inside stitched seams of the tent.
This will improve weather resistance. Available
in sporting goods departments. Discolouration
may occur if applied to outside seams.
Steel Poles: 10 each (total)
( ) denotes color coding
(A) Top Roof Pole (Orange) - 1 each
(B) Roof Pole - 3 each
(C) Side Pole Eave (Blue) - 2 each
(D) Front Leg Pole - 2 each
(E) Rear Leg Pole - 2 each
Fibreglass Pole: 1 each (total)
(E) Fly Pole - 1 each
2 each (C) Side Eave Poles (Blue)
5
D
D
E
E
B
A
C
C
B
B
B
A
C
C
B
D
D
E
E
5
5
B
Insert (B) poles
through connectors
