GB
14
Operating Instructions
a desired room temperature.
(15°C - 31°C)
-Press the “Fan Speed” button to
select wind speed.
6. Timer operation
a) Press the “Timer” button to set
Automatic Off time while the unit is
running.
b) Press “Timer” button to set Automatic
off time while the unit is ready.
c) The time can be adjusable within a
range of 1 hour to 24 hours. Press the
temp up (
+
) or temp down (
-
) button to
increase or decrease the time 1 hour by
pressing once.
7. Operation
a) The operation is effective when the
unit is under mode.
b) Press the button in mode, then the
unit will work under sleep mode and the
up centrifugal fan will turn to low speed
automaticlly. The set temperature will
increase 1°C After one hour and increse
2°C after two hours. After six hours, the
unit will stop running.
8. Operation
a) when the swing button is activated,
the swing blade swings up and down
automaticlly. If you want to stop, press the
button again.
Internal Tank Water Full Alarm
Function
The inner water tank in the airconditioner
has one water level safety
switches, it controls the water level.
When water level reaches an
anticipated height, the water full
indicator lights up. When the water is
full, please remove the rubber
blockage from the drainage hole at
the bottom of unit, and drain all water
outside.
Continuous Drainage
-When you plan to leave this unit
unused for a long time, please
remove the rubber blockage from the
drainage hole at the bottom of unit,
and drain all water outside.
-You can use the continuous drainage
with a drainage hose connected to the
bottom drain hole, when the unit
working at the HEAT mode.
-The continuous drainage is not need
to be applied when the unit working at
the COOL or DEHUMIDIFY mode.
The unit can evaporate the
condensate water automatically by
the splash motor. Make sure the
drainage holes are stemmed well.
-If water splash motor is damaged,
continuous drainage can be used.
To connect the drain hose to the
bottom drain hole, the unit can also
work well.
-If splash motor is damaged,
intermittent drainage can also be
used. Under this condition, when the
water full indicator lights up, please
connect a drain hose to the bottom
drainage hole, then all the water in the
water tank will be drained outside. The
unit can also work well.
Maintenance
Clean theunit with a soft moist cloth. Do
not use solvents or strong cleaners as this
might damage the surface of the unit.
Service
If the Air Conditioner requires servicing,
you must first contact your local retailer.
Proof of purchase is required for all
warranty claims.
Storage instructions
End of Season Storage
1) Screw off the drain cover and pull out
the stopper to drain condensate water
completely.
2) Keep unit running in fan mode for half
day to dry inside of unit completely to
prevent from going moldy.
3) Turn off the unit, pull out plug then
wrap the power cord around the wire-
winding pillar, insert the plug into the
universal fixing hole at the back panel
of the unit, install the water stopper and
drain cover.
4) Remove the heat exhaust hose
assembly,
clean and keep it properly.
Notes:
Hold the exhaust hose assembly with
both hands when removal.
Push the fasteners aside on exhaust air
outlet using your thumbs, then pull out
exhaust hose assembly.
5) Pack the air-conditioner properly with
soft plastic bag and put it in dry place
with appropriate dust-proof measures,
and keep the unit away from children.
6) Take out the batteries from the remote
control and keep it properly.
Note:
Assure the unit is stored in a dry place.
All accessories of the unit shall be
protected
together properly
Power cord holder and universal socket
can well protect the power cord.
High position of exhaust air outlet, easy
assembly and venting quickly.
Intelligent, environmental-friendly and
energy saving with self-evaporative
cooling system.
24-hour Timer function, unique on/off
reminding music.
3-minute delay re-starting protection to
compressor and other multiple protection
functions.
FUNCTION OF THE OPERATION MODES AND INSTALLATION DESCRIPTIONS