Page 8
The vision v4002 model is equipped with a built-in rechargeable battery.
The battery can be recharged simply by connecting the microscope to the provided external power supply,
using the jack connector on the rear.
During the charging process, you can use the microscope as usual.
In order to speed up the charging of the battery, it’s suggested to
turn the
Led
off
when you connect the external power supply.
For a full charge, it’s suggested to keep the external power supply connected
to the microscope for at least
8 hours.
Always unplug the external power supply
from the microscope, when
not in use.
5.0 ReCHARGeABLe BATTeRY
hOlD ThIs
lEvEr AnD
rOTATE IT
4.0 USInG THe MICROSCOPe
Summary of Contents for Vision V4002
