9
Sample Application
For best results, fill the Sample Application Area with the correct sample volume (35µl or
use the supplied capillary pipette for correct volume). Incorrect results may occur if the
sample is not applied correctly or if the Sample Application Area is not filled correctly.
Before Testing
After applying the sample, ensure that the Sample Application Area is completely covered.
The Sample Application Area should remain covered throughout the entire test. If the
Sample Application Area is not covered or if there is too much sample covering the Sample
Application Area, repeat the test with a new test strip.
Note:
If the sample applied to the Sample Application Area is not enough, do not add more
sample to the test strip. Retest with a new test strip. If the E-2 error or another error (refer
to Section 13 for error codes) appears on the display, please discard the used strip and
retest with a new strip.
Code Number
Printed on each package of test strips is a code number, lot number, unopened expiration
date and test quantity. Ensure the code number matches with the test strips and code chip.
Test Strip Precautions and Instructions for Use
•
Test strips should be stored in their tightly capped protective canister or foil pouch
to keep them in working condition
•
Do not transfer test strips to a new package of any other container
•
Replace the cap on the test strip canister immediately after removing a test strip
•
The opened expiration date is 3 months after the date the canister was first opened.
Write the opened expiration date on the canister label after opening. Discard the
canister 3 months after it was first opened. Usage after this period may result in
inaccurate readings
•
For in vitro diagnostic use
Summary of Contents for InSight Mini Chem
Page 1: ...User Manual...
