background image

02GRFF4118-V1

Overall Dimensions:

 

Length = 4246mm 

Width = 1512mm  

Height = 3459mm 

Base Dimensions: 

Length = 2504mm 

Width = 1525mm

Before assembly  

please make sure you have a 

suitable base ready to erect your 

building 

 

MADE IN GREAT BRITAIN

02GRFF4118-V1

For Assistance Please 

Contact Customer Care on 

01636 880514

2mm Drill bit

x2

Winter = High Moisture = Expansion

Summer = Low Moisture = Contraction

This building should be erected by 

two adults

For ease of assembly, you must pilot 

drill all screw holes and ensure all 

screw heads are countersunk.

CAUTION

Every effort has been made during the 

manufacturing process to eliminate the 

prospect of splinters on rough surfaces 

of the timber.  You are strongly advised 

to wear gloves when working with or 

handling rough sawn timer.

BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY 

- Check the pack and make sure you have all the parts listed. 

- When you are ready to start, make sure you have the right tools at hand (not 

supplied) including  a Phillips screwdriver, Stanley knife, wood saw, step 

ladder and drill with 2mm bit.

- Ensure there is plenty of space and a clean dry area for assembly. 

-Not suitable for children under 36 months.

-Please retain product label and instructions for future reference.

-This product has been designed to be permanently fixed into the ground and 

not present a hazard.

-Ensure the base is level and is built on firm ground, to prevent distortion. -We 

recommend that this product is situated at least two meters away from any 

structure or obstruction, including but not limited to, fencing, garages, 

houses, overhanging branches, laundry lines or electrical wires.

-We highly recommend that this product is not installed on a hard surface 

such as concrete, or asphalt. 

-To ensure the longevity regarding the colour of any plastic objects attached 

to this product we suggest, such items are positioned away from constant 

direct sunlight.

-Any modifications that are made to this product i.e. Adding another unit 

should be carried out according to the manufactures instructions.

-This product is delivered pressure treated with a water based treated.

Maintenance

Maintenance should be carried out at regular intervals. If checks are not carried out the product could overturn or otherwise 

become a hazard. Check at the beginning of each season and at regular intervals. Access all the nuts, bolts and screws for 

tightness, tighten when required. Check all coverings for bolts and sharp edges, replace any defective parts in accordance with 

the manufacturer’s instructions.

Sun

To ensure the longevity regarding the colour of any plastic objects attached to this product we suggest, such items are 

positioned away from constant direct sunlight.

WARNING: Only for domestic use

Not suitable for children under 36 month

To be used under direct supervision of an adult

This product has been tested to BS EN 71 standard however,  we cannot accept responsibility 

for your safety whilst erecting or using this product if these instructions have not been 

followed.

Mercia Garden Products Limited, Sutton On Trent, Newark, Nottinghamshire, NG23 6QN

www.merciagardenproducts.co.uk

The Woodland Trust is a charity 

register in England and Wales (No. 

294344) and in Scotland (No. 

SCO38885).

Small Skirting - 1320mm x 27mm x 144mm QTY 2

Fixing Kit

Big Base QTY 1

Long Post - 2750mm x 75mmx 75mm QTY 2

2

1

Roof 

QTY 2

4

5

6

7

8

9

10

Short Post - 840mm x 75mmx 75mm QTY 1

Long Skirting - 1673mm x 27mm x 144mm QTY 2

14

12

11

Medium Skirting - 1525mm x 27mm x 144mm QTY 1

3

Short Rail

QTY 2

Medium Rail QTY 2

Long Rail QTY 1

MediumPost - 2450mm x 75mmx 75mm QTY 4

Small Base QTY 1

Step QTY 1

Back Post - 1000mm x 75mmx 75mm QTY 2

13

Summary of Contents for 02GRFF4118-V1









Reviews: