Assemble the Ladder, so the
Ladder Steps are the same
distance apart as shown in the
diagram. The Ladder Legs should
be pushed right up to the grooves
in the Ladder steps, so the ladder
doesn’t rock.
Step 5
8 x 80mm Coach Screws
274mm
327mm
327mm
327mm
307mm
15
22
15
22
22
22
We strongly recommend pre drilling
holes before fixing screws.
Step 6
1 x 80mm Coach Screw
Stand the main assembly up
and attach the Ladder to the
inside of one of the Posts, the
Ladder end should be flush
with the Base.
We strongly recommend pre drilling
holes before fixing screws.
Don’t climb the ladder yet as
the assembly isn’t secure. With
the aid of a step ladder attach
an Over Bar to the inside of the
Posts, adjacent to the top of the
Rails. Fix using a bolted
connection and a 100mm
screw into each post.
Attach the Short Post to the
other side of the ladder using
a coach screw and a bolted
connection and a 100mm
screw into the Base and Over
Bar.
Attach the Under Support
between the posts flush with
the top of the base. using
50mm screws
Step 7
18
4 x Bolted Connections
1 x Coach Screw
14
17
9
2
4 x 100mm Screw
3 x 50mm Screw
We strongly recommend pre drilling
holes before fixing screws.
Step 8
8 x 80 mm Coach Screws
4 x Bolted Connections
Place 2 short posts flat on the
ground, parallel to each other and
1375mm apart. Attach the Long
Skirting to the ends flush with the
bottom and sides of the Posts
using 4 Bolted Connections per
Skirting board. Attach the long
rail to the posts as shown in the
diagram, flush to the top of the
Posts, using 8 Coach Screws per
Rail.
12
12
We strongly recommend pre drilling
holes before fixing screws.
