LIST OF PARTS
You will find the following parts in the box. Please check the list carefully and contact your retailer
if anything is missing. Use this list in conjunction with the drawings of the laser-cut parts at the
end of this manual.
Part No.
Description
Quantity
Material
1
Frame
1
3mm ply
2
Frame
1
3mm ply
3
Frame
1
3mm ply
4
Motor mount beam
1
3mm ply
4a
Motor mount bracket
1
3mm ply
4b
Motor mount nut (M3)
2
Mild steel
4c
Motor mount bolt (M3)
2
Mild steel
4d
Motor mount washer (M3)
2
Mild steel
5
Frame
1
3mm ply
6
Frame
1
3mm ply
7
Servo and battery tray
1
3mm ply
8
Transom
1
3mm ply
9
Keel
1
3mm ply
9a
Keel doubler
4
1.5mm balsa
9b
Keel trebler
2
1.5mm ply
10
Deck support
1
3mm ply
11
Chine stringer
2
3mm sq. ply
12
Gunwale
2
6 x 3mm ply
13
Bottom skin (stern)
1
1.5mm ply
14
Rudder support rings
3
3mm ply
15
Bottom skin (main)
2
1.5mm balsa
16
Side skin
2
1.5mm balsa
17
Bow profile blocks
28
3mm balsa
18
Bow deck coaming
1
3mm ply
19
Forward deck coaming
2
3mm ply
20
Aft deck coaming
2
3mm ply
21
Stern deck coaming
1
3mm ply
22
Spray rails
2
3mm sq. ply
23
Deck frame
1
3mm ply
24
Deck
1
1.5mm ply
25
Deck frame biscuits
3
1.5mm ply
26
Bow gunwale standoff
2
3mm ply
27
Midship gunwale standoff
2
3mm ply
28
Stern gunwale standoff
2
3mm ply
29
Gunwale
1
3mm ply
30
Equipment locker side
2
1.5mm ply
31
Rear seat side
2
1.5mm ply
32
Rear seat front
1
1.5mm ply
33
Equipment locker front
1
1.5mm ply
34
Equipment locker rear
1
1.5mm ply
35
Rear seat top
1
1.5mm ply
36
Equipment locker top
1
1.5mm ply
37
Steering console front
1
1.5mm ply
38
Steering console locker doors 4
1.5mm ply
39
Steering console top
1
1.5mm ply
40
Steering console cross piece
1
1.5mm ply
41
Steering console side
2
1.5mm ply
42
Steering console dashboard
1
1.5mm ply
43
Comms tower side frame
2
1.5mm ply
44
Comms platform bearer
2
1.5mm ply
45
Upper comms tower joiner
2
1.5mm ply
46
Lower comms tower joiner
2
1.5mm ply
47
Comms platform
1
1.5mm ply
48
Aerial
2
2mm dowel
49
Radar antenna
1 (2 pcs)
Printed plastic
50
Seated crewmen
1
Printed plastic
51
Steering wheel
1
Printed plastic
52
Stretcher
1
Printed plastic
53
Fairleads
2
Printed plastic
54
Samson post
1
Printed plastic
55
Samson post bar
1
Printed plastic
56
Deck magnets
2 (4 pcs)
6mm diameter
57
Stand end plates
2
3mm ply
58
Stand name plates
2
3mm ply
GENERAL INFO: STICK WITH US!
The team here at the Wooden Model Boat Company are acutely aware that quality tools and materials play a vital
part in the successful completion of any model build. Fortunately our staff are active modellers too, so we’re very
fortunate in being able to both supply and thoroughly recommend the perfect glues, paints and materials that are
needed to complete your Thames Lifeboat to a very high standard. We can do this because we’ve built one.
Actually, more than one!
RECOMMENDED MATERIALS
The following is a list of the recommended materials you’ll need to complete the model as
depicted on the box and in the accompanying drawings and photographs (see jperkins.com).
Description
J Perkins Part No.
MD Aliphatic White Glue
MDP5524821
ZAP Epoxy (15 min)
5525782-1
MD Super Filler
MDP5524830
500-Grit Sandpaper
–
800-Grit Sandpaper
–
1200-Grit Sandpaper
–
Sanding block
–
Guild Lane Sanding Sealer (60ml jar)
GLDCEX1100060
Guild Lane High Build Primer (400ml aerosol)
GLDCEX0960400
Guild Lane Satin Fuel Proofer (400ml aerosol)
GLDCEX1310400
Chroma Enamel Gloss Orange (400ml aerosol)
GLDCHR6406
Chroma Enamel Gloss Red (400ml aerosol)
GLDCHR6401
Chroma Enamel Gloss White (400ml aerosol)
GLDCHR6400
