®
WOODBRIDGE
ONE PIECE TOILET
CLEANING &
丁
ROUB
L
ESHOO
T
ING (
F
ILL VALVE)
FILL VALVE CLEANING
Shut off water supply line
before filter cleaning
｀
/
＼
三
gt
Carefully, take out the
fi
l
te
r
from inlet by using pliers
Use water to wash and clean
R
e
-
i
ns
t
a
l
l
the filter and
the filter and adapter from any re-connect the water supply
debris.
line.
TROUBLESHOOTING
Issue
Cause
Solution
Water level is too high or
Improper water level
Adjust the water level
too low
adjustment
Fill valve fails to shut off
1.
I
n
let
valve switch is
1. Tum on inlet valve switch
or fai Is to fi II the water
turned on.
2. Adjust inlet valve position
into the toilet's tank
2. Inlet valve float crashed
3 Clean the filter screen
against ceramic wall
4. Install ref ii I hose correctly (see
3. Filter screen 1s clogged
diagram on the right)
due to dirty water
4
.
Improper refill hose
installation
MAINTENANCE & CARE
Solution #4
WRONG
RIGHT
Water
Level
Use soft sponges or soft-cloths to clean the surface. Always rinse thoroughly any cleaning solutions immediately after cleaning. Do
not any chemical remain on the surface for extended periods of time
IMPORTANT!
DO NOT USE:
Abrasive cleaners such as: acid. ammonia. bleach, and simmilar solutions. Use
of
such solutions may cause
corrosion, finish peeling, and/or dull the surface
DO NOT USE:
Abrasive sponges or cloth. Never use steel. wool, or wired brushes that will permanently scratch the surface
FILL/FLUSH VALVES MAINTENANCE & CARE
Do not pour any mounts of chlorine or any other chemicals into the tank. Use of chemical products will result in damage to the fill valve and
flush valve components and may cause flood and property damage
Note:
fill
and flush valves are maintenance free. No maintenance is required
Retain these installation instructions for future reference!
Thank you for using WoodBridge products!
Customer Service Phone: 562-774-2284. (Monday - Friday 9 AM - 5 PM Pacific Time)
Or Email: [email protected]
www.woodbridgebath.com
