7
LIGHTING INSTRUCTION
FOR YOUR SAFETY READ BEFORE OPERATING
If you do not follow these instruction exactly,
a re or explosion may result causing property
damage, personal injury or loss of life.
WARNING
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN
CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THE OWNER’S MANUAL PROVIDED WITH
THIS APPLIANCE. FOR ASSISSTANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED
INSTALLER, SERVICE AGENCY, OR THE GAS SUPPLIER. WHEN LIGHTING THE BURNER, DO NOT
FULLY OPEN VALVE. PRESSURE WILL EXTINGUISH MATCH.
WARNING
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPOURS AND LIQUIDS IN THE
VICINITY OF THIS OR ANY OTHER APLLIANCE.
WARNING
LIGHTING INSTRUCTIONS
1. Locate the manual Gas Control Valve (see also Parts List).
2. Place the firestarter near the burner ports on top of the burner. Light the firestarter.
3. For a Natural Gas Fire Pit, turn on the ON/OFF valve slowly at the unit.
For a LP Fire Pit, turn the valve in the LP tank counter clockwise all the way and
then turn on the ON/OFF valve slowly at the unit.
4. If the burner does not light before the match goes out, immediately turn the gas OFF!
5. Wait at least five (5) minutes to clear any gas, then smell for gas including near the base of the unit.
If you smell gas, STOP! Refer to the safety information in the Owner’s Manual.
If You DON’T SMELL GAS, repeat step 2.
TO TURN OFF GAS
For Natural Gas Fire Pit turn the ON/OFF valve to OFF position at the unit. For LP unit turn the
ON/OFF valve to OFF position at the unit and then turn the valve on the LP tank clockwise to
the OFF position.
Manual Shutoff Valve
in “ON” position
Manual Shutoff Valve
in “OFF” position
