12
An ongoing program of product improvement may require us to change
specifications without notice.
MH-RFG-W
Revised November 2009
Wood Stone Corporation
1801 W. Bakerview Rd.
Bellingham, WA 98226 USA
Toll Free (800) 578-6836
Tel (360) 650-1111
Fax (360) 734-0223
or visit
www.woodstonehome.com
Mountain Series Installation and Operation Manual
eLeCtriCaL SpeCiFiCationS
This appliance must be electrically grounded in accordance with local codes, or in the absence of local codes,
with the National Electrical code, ANSI/NFPA 70 or the Canadian Electrical Code, CSA C22.1 as applicable.
If this appliance was provided with a cord, the cord is equipped with a 3 prong grounding plug for your protection
against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove
the grounding prong from the plug.
ELECTRICAL
Incoming power should be connected to the terminal strip located in the transformer junction box beneath the
appliance. (See page 16 for diagram).
The standard appliance model comes configured for connection to a 120 V circuit. Always refer to the equipment
data plate beneath the appliance to verify the proper voltage. The voltage is also specified on the transformer
box cover. Never connect an appliance rated 120 V to a 240 V circuit or vice versa.
It is recommended that the appliance be connected to its own individual branch circuit. have a licensed electrician
connect the appliance to the appropriate 120 V circuit.
Electrical diagrams are located directly to the right, behind the removable service/intake panel of the appliance
as well as inside the control box. Electrical diagrams are also located in this manual on page 31. See page 17
of this manual for location of the transformer housing.
Electrical Ratings:
120 V, 2 amp
ELECTRICAL GROUNdING
WARNING FOR APPLIANCES EQUIPPEd WITH A POWER CORd
ELECTRICAL SPECIFICATIONS