FD-6045-CE and FD-8645-CE
Fire Deck Installation and Operation Manual
PG
12
OF
32
M0042.13 JULY 2019
FACADE REQUIREMENTS
Oven Arches
DO NOT REMOVE
Removal will affect structural integrity,
heat retention, operation and
void the Warranty
�
As an optioin, a 25 mm (1") wide stainless steel lip is provided around
the doorway opening and around the air intake vent� This is provided so
that the noncombustible, sanitation approved materials used to cover the
cement board can be neatly terminated at these points�
OVEN
CEMENT BOARD
25 mm (1") stainless
steel perimeter lip
Tile or other noncombustible,
sanitation approved material
(supplied by others)
WS-FD-6045-CE
The facade-ready front Fire Deck features cement board already installed on the front surfaces of the oven� ANY MATERIALS
AFFIXED TO THE CEMENT BOARD MUST be NONCOMBUSTIBLE�
The hatching
represents surfaces
of the oven that are
covered with cement
board. All parts of the
oven which are meant
to be left exposed are
not hatched.
Total thickness of facade materials, including the
cement board, should not exceed 25 mm (1") in
thickness in area above the door to allow removal
of door system components for service�
Wood Stone ovens are designed and tested to meet the requirements concerning the hygiene aspects of large kitchen appliances
using gaseous fuels, so as to eliminate or minimize the risk of contagion, infection, illness or injury arising from the consumption
of contaminated food� To operate the oven in accordance, only pizza and bread products may be cooked directly on the floor of
the oven� Other types of food may be cooked on or in pans, or other suitable container to prevent spillage onto the oven deck�
ABOUT FACADE MATERIALS
Fire Deck Series ovens can be finished with any non-combustible decorative material that can be easily affixed to the oven
surface, including tile, stone or brick� It is always advisable to consult with the appropriate authority having jurisdiction before
proceeding as there may be regulations regarding the suitability of various materials� Temperatures above the oven doorway can
reach 90 °C (200 °F)� Select materials and adhesives suitable for that temperature�
