Safety
Planer/moulder operation
Safety
EGdoc121819
2-5
2
When planing smaller material, it should be stiffened/extended, e.g.
with a longer piece of wood.
Never stand in front of the material being fed or received, because it
may suddenly kickback uncontrollably towards the operator. This
applies to both the in and outfeed sides, although the risk is higher on
the infeed side.
DANGER!
Planing/moulding is possible only in direction shown below.
Arrow “A” indicates planning direction on the upper table. Arrow “B”
indicates planning direction on the lower table. Never try
planing/moulding in the opposite direction.
DANGER!
When planing on the upper table use the pusher “C”
provided with the machine. It is not allowed to push the material by
hand!
FIG. 2-1
A
C
B
Summary of Contents for MP160
Page 2: ......
