INTRODUCTION
Machine description
1
1-3
doc072921
INTRODUCTION
It is recommended to screw the planer/thicknesser down to the ground, if it does not have to be
moved.
Ensure that there is enough space for the longest boards you want to plane at the in and
outfeed sides, and that there is enough space for maintenance and timber stocks.
Connect the dust hoses and fix using the hose clips on the planer and fan.
Hang the planer/thicknesser's electrical cable on the ceiling or protect it in another way. Never
step on the cable. The planer/thicknesser should be connected via an earth-fault protection
switch.
CAUTION! The illumination at the operator's position should be at least 300lx. The light source
can not cause stroboscopic effect. Ensure that there is no risk of glare.
SPACE REQUIREMENTS
The planer/thicknesser needs a space of at least 3 m (6 1/2 ft) wide.
The length required depends on the length of the workpieces you want to plane. The minimum length is
4 m (13 ft).
ANCHORING
For the highest safety, the planer/thicknesser must be anchored to the floor using screws dia. 8-10
mm.
LIST OF THE TOOLS REQUIRED TO WORK WITH THE PLANER/ THICKNESSER:
Allen wrench 4mm (supplied)
Allen wrench 5 mm
Allen wrench 6 mm
Flat wrench 10 mm (supplied)
Wrench 10 mm
Outfeed
table
Infeed table
Control panel
Higher risk area
Safety distance for all other persons
MP160
5 ft (1,5m)
5 ft (1,5m)
13 ft (4m)
13 ft (4m)