Wood-mizer MF130 E3S, User Manual, Page: 37 / 45

MAINTENANCE & ALIGNMENT
Long-term storage
MAINTENANCE & ALIGNMENT doc101521 5-2
5
2. Regularly check all the cables and connections and ensure that the motor compartment is kept free
from shavings so that the motor fan receives cooling air.
3. Lubricate these parts every 50 hours:

The thread spindles and their bearings.

Guide ways on vertical arm and horizontal arm.

Worm gear on tilting center.

Guide ways on the fences

Spindle (at an angle) and its bearings
4. Every 50 hours check if all screws and bolt connections are tightened. Check that cables and
electrical connectors are in good condition.
5.4 Long-term storage
If the machine is not used for a long period of time, do as follows:

Disconnect the power cord.

Perform all routine actions described above.

Loosen the motor belt tension.

Spray a thin layer of anti-rust coating (such as P.D.R.P) onto the places not protected against
rusting.

Store the machine in a well ventilated room.

Cover the Table Saw.
50
50