![Wood-mizer LT20 AH Series Safety, Setup, Operation & Maintenance Manual Download Page 11](http://html1.mh-extra.com/html/wood-mizer/lt20-ah-series/lt20-ah-series_safety-setup-operation-and-maintenance-manual_994647011.webp)
Safety & General Information
Sawmill Operation
Safety & General Information
25doc092506
1-5
1
WARNING!
Always make sure log is clamped securely
before sawing. Failure to do so may result in serious injury
or death.
WARNING!
Use ONLY water with the water lube
accessory. Never use flammable fuels or liquids. If these
types of liquids are necessary to clean the blade, remove it
and clean with a rag. Failure to do so may result in serious
injury or death.
CAUTION!
Be sure the pivot rails, turning arm, clamp, and
toe boards are below bed level before loading a log onto
the bed. Failure to do so may result in machine damage or
cause misalignment.
CAUTION!
Before loading a log, be sure the cutting head is
moved far enough forward so the log does not hit it. Failure
to do so may result in machine damage.
CAUTION!
Do not try to force the saw head beyond its
upper and lower travel limits. Damage to the up/down
system may result.
CAUTION!
Do not use the blade guide arm knob to move
the carriage head forward and backward. Damage to the
blade guide arm may result.
CAUTION!
Be sure to stop the blade when returning the
carriage. This will not only prevent the blade from being
pulled off and ruined by a wood sliver, but also will increase
the life of the blade.