Setup & Operation
Transporting the Sawmill
3
3-26
15doc080213
Setup & Operation
See Figure 3-8.
3.
Remove the leg assemblies or adjust them above the bottom of the bed frames.
4.
Position the bed of the truck at the end of the frame opposite the saw head.
5.
While two people lift the end of the frame without the sawhead, back the truck under the sawmill
until the the end of the frame is resting firmly on the bed of the truck.
6.
With a person positioned on either side of the saw head, disengage the travel lock pin. Push the
saw carriage up the bed frame and engage the travel lock pin in the end of the frame in the truck
bed.
7.
Use two people to lift the end of the mill still on the ground and slide the sawmill into the truck bed.
WARNING!
Keep all persons out of the path of the saw head while
loading and unloading the sawmill. Failure to do so may result in
serious injury or death.
8.
Secure the sawmill to the truck bed to prevent the sawmill from shifting while it is being transported.
FIG. 3-8