Wood-mizer LT15 M2-3 E11S, Safety, Setup, Operation & Maintenance Manual

Page: 16 / 108

Safety & General Information
Belt Sizes
1
1-9 15doc121912 Safety & General Information
1.6 Belt Sizes
See Table 1-2.
Belt sizes for the LT15 are shown.
1.7 Blade Sizes
See Table 1-3.
Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient sawing for all
models of sawmills. The engine/motor size of your sawmill and the type of wood you saw should determine
which blade you choose for optimum performance.
See The Blade Handbook
for blade hook angle, tooth height, and tooth set specifications.
Description Belt Size Wood-Mizer
Part #
Motor Drive Belt (E11, E15)
B81 014819
Up/Down Drive Belt
SF AVX
13x1100 La
095306
Blade Pulley Belts
B57
1
1
To insure proper blade tracking, use Goodyear, Dayco Super II,
or Browning belts only.
P04185
TABLE 1-2
Engine/Motor Size Recommended Blade For Sawing:
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp
B275IH1030
B275IH741030 B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are
designed to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™
blades use a 10/30 profile.
16hp or more
B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
B375IH929
1
Electric Motor
B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 1-3