LubeMizer Installation
Control Box Wiring
1
1-8
LMS99doc032619
LubeMizer Installation
Install a female terminal to the end of the 5" length of wire #20 that remains con-
nected to the ground stud. Install a male terminal to the end of the remaining length
of wire #20.
See Figure 1-5.
Connect black lube wire #259 to the female terminal on the 5" length of wire #20.
Connect blue lube wire #257 to the male terminal on the remaining length of wire
#20.
8.
Using the existing mounting bolts, install the lube control assembly to the sawmill control
box. Replace the rear control box panel.
FIG. 1-5
Female Terminal
Male Terminal
3H0761