Wood-mizer KD150 Series User Manual Download

Page: 5 / 47

Getting Service

Wood-Mizer is committed to providing you with the latest technology, best quality and

strongest customer service available on the market today. We continually evaluate our

customers’ needs to ensure we’re meeting current wood-processing demands. Your

comments and suggestions are welcome.

General Contact Information

Toll free phone numbers are listed below for the

continental

U.S. and Canada. See the

page for contact information for more Wood-Mizer locations.

Office Hours:

All times are Eastern Standard Time.

Please have your vehicle identification number and your customer number ready when

you call.

Wood-Mizer will accept these methods of payment:



Visa, Mastercard, or Discover



COD



Prepayment



Net 15 (with approved credit)

Be aware that shipping and handling charges may apply. Handling charges are based on

size

and quantity of order. In most cases, items will ship on the day they are ordered.

Second Day

and Next Day shipping are available at additional cost.

If your equipment was purchased outside the United States or Canada, contact the dis-tributor
for service.

United States

Canada

Sales

1-800-553-0182

Service

1-800-525-8100

Website

www.woodmizer.com

1-877-866-0667

www.woodmizer.ca

E-mail

[email protected]

Monday - Friday

Saturday

(Indianapolis Office Only)

Sunday

a.m. to 5 p.m.

8 a.m. to 12 p.m.

Closed

KD150 12/22/17

Summary of Contents for KD150 Series
















































Search results

Summary of Contents for KD150 Series

Reviews:

Related manuals for KD150 Series

Brands by name

Popular brands

Wood-mizer KD150 Series, User Manual

Search results

Summary of Contents for KD150 Series

Reviews:

Related manuals for KD150 Series

Brands by name

Popular brands