60
MAINTENANCE
3. WEEKLY MAINTENANCE
(1) Clean the filter screen and fan in the electrical cabinet.
(2) Clean the entire machine and the working area.
(3) Check if any switch or push-button has loosened or not. If loosened,
tighten securely.
(4) Check if warning devices and proximity sensors work normally on not.
(5) Open wheel Hubs on Saw Wheel and tighten Bearing retaining nut by one notch,
this ensures the bearings are preloaded. (
PLEASE NOTE (5) THIS WILL ONLY
BE PERFORMED AFTER THE FIRST WEEK OF OPERATION
)
4. HALF-YEAR MAINTENANCE
(1) Check if air source pressure is set in the normal range.
(2) Check home positions of various mechanisms.
(3) Check positioning accuracy and gear backlash.
5. YEARLY MAINTENANCE
(1) Inspect machine accuracy. If necessary, make adjustment.
(2) Inspect leveling accuracy.
(3) Check if all switches and push-buttons work normally or not.
