7. Raise the blade again so it touches the grinding wheel. The grinding wheel should have full contact through the gullet of
the Blade. If there is still a gap, repeat steps 3 - 5 continuing to adjust the blade until full contact.
Gullet
Do not allow the CBN wheel to start grinding the tip before the wheel is fully in the gullet. Grinding the tip of
the tooth prematurely will result in ruining the profile of the blade and ruining the CBN Wheel.
NOTE:
CBN wheel damaged by premature grinding
of the tooth tip.
P
AGE
3
Excessive burning on the tip is a sure sign that
the CBN wheel is starting the grind at the tip of
the tooth, as opposed to the full "plunge" profile
grind.
S
TANDARD
O
PERATING
P
ROCEDURE
S
HARPENING
A
LIGNMENT
: BMS 250
