Safety & General Information
Blade Handling
Safety & General Information
HD92doc042701
1-1
1
SECTION 1 SAFETY & GENERAL INFORMATION
This symbol calls your attention to instructions concerning your personal safety. Be sure
to observe and follow these instructions. This symbol accompanies a signal word. The
word DANGER refers to hazards that can cause death or serious, irreversible personal
injury. The word WARNING suggests a safety hazard that can cause personal injury.
CAUTION refers to hazards that can cause damage to the equipment or property only.
Read all safety instructions before operating this equipment and observe all safety warn-
ings!
Safety instructions are listed in this section by the following operations:
Blade Handling
Sawmill Setup
Sawmill Operation
1.1
Blade Handling
WARNING!
Always wear gloves and eye protection when
handling bandsaw blades. Keep all persons away from
area when coiling or carrying a blade.
1.2
Sawmill Setup
DANGER!
Chock the trailer wheels to prevent movement
before unhitching it from the towing vehicle.
DANGER!
Put front outrigger down before moving cutting
head from the rest position.
WARNING!
Do not set up the mill on ground with more than
a 10 degree incline. If setup on an incline is necessary, dig
out areas for outrigger legs to keep mill level. Setting up the
mill on an incline could cause it to tip over!
