15
Commercial Series Cyclone Owners Manual
April 2012
Warranty
This Warranty is provided by Northwest Manufacturing, Inc. only for the benefit of the, initial purchaser (Original Owner)
of the Northwest Manufacturing, Inc. Cyclone Separator (”System”) on the original site of installation (the “Site of Original
Installation”).
This Warranty provides specific legal rights. You may have other rights depending on where you live.
The rights in this warranty depend on the proper assembly, installation and commissioning of the System by a contrac-
tor or installer who is certified by Northwest Manufacturing, Inc. (the “Certified Contractor”); and proper operation and
maintenance by a Certified Boiler Operator that is also certified by Northwest Manufacturing Inc. to operate the system.
Proper maintenance must be preformed. Installation by an uncertified or unqualified contractor or installer and/or
improper maintenance, operation, misuse or abuse of the system shall void this Warranty in whole or in part.
LIMITED TWO (2) YEAR WARRANTY
Northwest Manufacturing, Inc. warrants that the components of the Cyclone Separator shall be free of defects in mate-
rial and workmanship for TWO (2) YEARS from the Date of Original Installation. Once a defect is determined, repair or
replacement of the defective parts, will be at the sole discretion of Northwest Manufacturing, Inc..
START OF WARRANTY PERIODS
The Warranty Period shall begin on the date the System installation has been completed (the “Original Date of Installa-
tion”). In the event of dispute as to the Date of Original Installation, the shipping date of your System, as recorded by
Northwest Manufacturing, Inc., shall be deemed to be the Date of Original Installation.
WARRANTY LIMITATIONS
I. Damages for unsatisfactory performance caused by improper installation or any damages caused by or as a result of
improper use of the System, incorrect start-up, incorrect or careless handling, improper control adjustment, disregard of
the operating instructions and proper maintenance or disregard of any other instructions. Improper alteration and
repairs/service by a third party not affiliated with Northwest Manufacturing, Inc. will not be covered under this warranty.
All repairs must be performed by a Certified Contractor.
II. The workmanship, repairs or replacement of parts of the Certified Contractor will not be covered under this warranty.
III. Any costs for labor for the examination, removal or reinstallation of allegedly defective parts, transportation of the
parts to and from Northwest Manufacturing, Inc. facilities will not be covered and will be the responsibility of the Origi-
nal Owner. This includes any other labor and costs for any material necessary for the said examination, removal or
re-installation.
IV. The warranty will not cover damage to the System or any of its original parts, replacement parts or other accessories
or standard equipment caused by excessive temperatures, vandalism, fuel or gas explosion, electrical, chemical or
electrochemical reaction, electrical failures, insurrection, riots, war, acts of God, combustion air contaminated externally,
air impurities, sulfur or sulfuric action or reaction, dust particles, corrosive vapors, oxygen corrosion, and situating the
System in an unsuitable location or continuing use of the System after onset of a malfunction or discovery of a defect.
V. This Warranty only covers manufactures defects and will not cover damage caused by ash corrosion.
TWO YEAR LIMITED WARRANTY
