
13
CLEANFIRE OUTDOOR FURNACE • OWNER'S MANUAL
NOTE: If the system has a larger than normal water capacity, more MolyArmor 350
should be added at a recommended rate of 6.5 oz. (190 ml) per 10 gallons (37.8
liters) of system water. One unit (1 gallon or 3.78 liters) of MolyArmor 350 will treat
200 gallons (757 liters) of system water.
Water Samples
Maintaining the corrosion inhibitor at a proper level is imperative to
preventing corrosion failures. To qualify for the 25 year warranty, you must
follow the instructions in the Owner's Manual and the Installation and Initial
Water Treatment Guide concerning initial water treatment and maintenance.
When the outdoor furnace is initially put into service, and once a year
after that, you are required to submit a water sample to confirm proper
maintenance and water treatment (see When to Submit Water Sample for
more information). No warranty claim can be approved unless the outdoor
furnace registration and the required water tests verifications are on file at
WoodMaster.
NOTE: It is your responsibility as owner to ensure that your water sample information
is accurate and that you submit your samples on a timely basis as required by the
warranty for your stainless steel outdoor furnace. Failure to do so will result in a one
year warranty.
Water Sample Kit
Your owner's packet contains a Water Sample Kit for submitting an
initial water test. Additional Water Samples Kits are available from your
WoodMaster dealer.
When to Submit Water Sample
INITIAL WATER SAMPLE: You are required to submit an initial water sample
within 30 days of purchase of your outdoor furnace. EXCEPTION: if your
outdoor furnace is not being installed within 30 days of purchase, you
must email WoodMaster ([email protected]) with an estimated
installation date, your name and your furnace serial number. When the
furnace installation is complete, send the water sample within 10 days of
the initial fill.
ANNUAL WATER SAMPLE: You are required to submit a water sample
yearly prior to the anniversary date of your initial installation. Record the
anniversary date below:
_________________________
DATE OF INSTALLATION
TO CHECK STATUS OF YOUR WATER SAMPLE: Check the status of your
water sample at:
WoodMaster.com/w25
You will need your serial number and postal code. Please allow 2-3 weeks
for results to be available.