5. 1 Mechanism Specification
5. SPECIFICATION
5. 1. 1 MECHANICAL
5. 1. 2 ENVIRONMENTAL
5. 1. 3 FUNCTIONS
5. 1. 4 ELECTRICAL
5. 1. 5 USER CONNECTRIONS
5. 1. 6 CERTIFICATIONS
- Pan : 360° Continuous Pan, 0.1º to 160º/sec. (64 steps proportional to zoom)
- Pan Preset Speed : 330°/sec, ± 0.1° Accuracy
- Tilt : 0.1º to 140º/sec. (proportional to zoom)
- Tilt Preset Speed : 250°/sec, ± 0.05° Accuracy
- Weight : Approx. 4.4Kg (10.8 lbs) / Packing : 4.9Kg
- Dimensions : 236(Ø) x 319(D) mm – 166(Ø) dome
- Construction : Aluminum
- Ingress Protection : IP66 (Outdoor Housing)
- Color : Cool gray
- Operating Temp : Indoor : 0°C to 50°C (32° F to 122° F)
Outdoor : -10°C to 50°C (14° F to 122° F)/ with 33W Heater(Optional 62.7W)
- Storage Temp : -20°C to 60°C (-4° F to 140° F)
- Humidity : 0% to 90% (non-condensing)
- Fan operate : 45°C on , 35°C off
- Heater operate : 5°C on , 15°C off
- Preset : 255 points, less than 0.1° accuracy
- Tour : 8 programmable
- Pattern : 4 patterns for 240 second.
- Auto Flip : Auto / Off (Rotate 90° at bottom of tilt)
- Scan : 8 (programmable speed and diagonal scan)
- Privacy Zone : 8 block with title (Mask)
- ID Address : Up to 255 selectable ID (Rotary switch)
- Data Communication Control : RS-485 / RS-422
- Protocol : Multiple protocol
- Baud rate : 2400, 4800, 9600, 19200, 38400, 57600 bps selectable
- Alarm In : 8 alarm
- Alarm Out : 2 relay out
- Display : 16 Area title
- Power : AC21~26V 60Hz / 50Hz(Power adaptor not included)
- Camera Power Consumption : 18.0W
- Heater Power Consumption : 33W
- RS-422, 485 : Dip Switch setting
- Power : AC24V, 50/60Hz (Max)60W
- Data communication connection : RS-422, 485 + / - Optional Control Data
- Video connection : BNC (HD-SDI)
- Alarm Inputs : 8 Programmable
- Relay Out : 2 Dry Contact Output Rating: 2A @30VAC
- CE EMC , FCC CLASS A, RoHS
58
EWSJ Series Outdoor Speed PTZ Dome Camera System User
’s Guide
59
EWSJ Series Outdoor Speed PTZ Dome Camera System User
’s Guide
4. 6 Clear Setting
MAIN MENU
< NEAR / RIGHT
▶
CLEAR >
MOTION
▶
DOME
▶
CAMERA
▶
CLEAR
▶
PTZ RESET
▶
EXIT
CLEAR MENU
< SEL
▶
NEAR LEFT /RIGHT>
PRESET
▶
YES NO
TOUR
▶
SCAN
▶
PATTERN
▶
AREA
▶
PRIVACY
▶
ALARM
▶
▶
PRESET CLEAR:
select : or Set ON :
Set OFF :
NEAR
NEAR
4. 7 PTZ Reset
MAIN MENU
< NEAR / RIGHT
▶
RESET >
MOTION
▶
DOME
▶
CAMERA
▶
CLEAR
▶
PTZ RESET
▶
EXIT
It is a reset function and is useful when you change the dipswitches for address, protocol and baud rate.
Clears the PTZ position and function value. With this function the camera keeps the accuracy
of the PTZ position value.
