3
Ventilation requirements
Note: see convector instructions if being installed within a Wonderfire convector box for
ventilation requirements.
GB
A permanent ventilation grille
of fixed design and having a
minimum free area of 100cm
2
must be fitted with direct
access to outside air to room.
IE
Ventilation must be in
accordance with IS 813 1996
(as amended)
Please note: This appliance is not
supplied with a decorative
firefront. A slotted firefront with a
minimum free area as shown in
figure 2 must always be used.
Operation of the fire
This fire may be controlled manually, by use of a gas valve mounted on the appliance.
The flame settings may also be controlled by means of the remote control handset. To
prevent accidental operation of the fire, we recommend that the fire be switched off
when not in use.
To Light the Pilot
Please note:- The fire must be lit manually.
Ensure that the pilot burner control knob is in the OFF position (1). Depress the
control knob and turn anti-clockwise to the ignition position (2) to activate the piezo
ignition system. A ‘click’ will be observed, and the pilot should light. Hold the knob in
this position (keeping it depressed) for ten seconds to allow the flame supervision
device to establish.
Gas Valve
Figure 4
5
Main Burner
Control Knob
4
3
2
1
Figure 3
Pilot Burner
Control Knob
High Flame
Low Flame/Pilot
Remote Control
Handset
6
Figure 2
