Assembly
Please confirm the accessories on the previous page to make sure there is no shortage.
Note: Lock pin position instruc-
tion
Lock pin at hole F: Folding mode
Lock pin at hole U: Upright bike mode
Lock pin at hole R: Recumbent bike
mode
Step 1: Unfold the main frame
-Remove (1-1) Lock pin from hole F, as
shown on Fig. A.
-Unfold the main frame and insert the
lock pin at hole U, as shown on Fig. B.
Warning:
Do not assemble or disassemble the
parts, while lock pin is at hole F. It will
result in the product falling down and
causing injury.
Step 2: Assemble the foot sets
-Attach (2) Front foot set to Main
frame. Tighten (17) Ø 8 Arc washer
and (21) M8 Cap nut with (S-2)
Wrench.
-Attach (3) Rear foot set to main
frame. Tighten (17) Ø 8 Arc washer
and (21) M8 Cap nut with (S-2)
Wrench.
Note: Make sure the
wheel on the front foot
set is facing forward.
Fig. B
Fig. A
