WON TECH WON COSJET ATR S, User Manual

Page: 41 / 55

User Manual
WT-UM-08 (v4.4)
41/55
6 MAINTENANCE
6.1 General Information
(1) After use, wipe the tip of handpiece which was contacted with the patient with alcohol
according to the procedure indicated 6.3 section. Isopropyl alcohol can be purchased at any
local store.
(2) Once a week, wipe the exterior sides of WON COSJET ATR S Laser System with a dry towel.
In particular, clean the LCD display/Touch Pad, using gentle care not to scratch the surface.
(3) Do not drop any food or liquid on the equipment. It may affect the electrical parts in the
equipment or cause damage.
(4) Do not place anything on the base frame or apply any pressure onto it when the WON COSJET
ATR S laser system is not in use.
(5) Handle the Articulated ARM with care. It can cause damage in joint part for connection.
(6) Do not move or relocate the device while the power is on
(7) When the WON COSJET ATR S laser system is not in use for a period longer than one day,
unplug power plug.
(8) Follow local governing ordinances and recycling plans regarding the disposal or recycling of
device components.
(9) Routine cleaning of the Handpiece safety glass and tip instruction is explained in the following
sections for user (Operator as trained doctor).
(10) All other maintenance and service must be performed by a qualified service representative.
6.2 Attention
6.2.1 General Attention
- Do not operate the laser without a skilled doctor or designated specialist indicated in
intended use part. Check the device working before operation.
- Call a technical engineer when the laser shows unusual signals or troubles.
- Do not put any foreign parts to the unit or remove any components from the unit.
- Check the device not in use before operating.
6.2.2 Individual Attention
- Do not look at the laser aperture directly.
- While the laser is in use, all people in the treatment area should wear the safety goggles.
- Do not use the laser with the flammable anesthetic or in the volatility matter areas.