7
6. Getting Started
6.1 Install battery
1)
Slide battery door outward. Please
see the picture.
2)
Insert 2 x AA batteries (not supplied)
into the battery compartment
according to the polarities shown in the compartment.
6.2 Power on/off the scanner
Press and hold Power/Scan button for 2~3 seconds to turn on/off
the scanner.
6.3 Insert and format a MicroSD memory card
You need to use a MicroSD card to record and store the scanned
files. The scanner supports the capacity up to 32GB. The MicroSD
card must be formatted before the first scanning.
1)
Turn off the scanner.
2)
Insert MicroSD card (not supplied) with gold contacts
facing up. Gently push the card all the way in until
latched. Do not force the
card into the slot; forcing
may
damage
the
scanner
and
the
MicroSD memory card.
Please see the picture.
3)
Power on the scanner.
4)
Use the tip of a paper clip to press “FORMAT” hole. “F”
will show on the LCD.
5)
Press Power/Scan button to start formatting the card.
6)
SD card indicator will be blinking until formatting is
completed.
