9
and then slide the scanner across on the white area back and
forth slowly and smoothly until the
green
LED goes off.
6)
The white color balance calibration is completed.
7)
Repeat the calibration process as needed.
6.6 Set color mode and resolution
The default settings are in
COLOR
mode and
LOW
resolution.
Press
DPI
button to select resolution in
HIGH
or
LOW
. And press
C/BW
button to select color in
COLOR
or
MONO
mode.
6.7 How to scan
1)
Use dry cleaning cloth (included) to clean scanner glass each
time before use.
2)
Place document on a flat surface, or have
a cardboard support the back of page for
magazines or books. Press and hold
document firmly with one hand.
3)
Place scanner on the start position (i.e. at the top of the page.)
4)
Hold scanner firmly and press the
SCAN
button once to start
scanning.
5)
Slide scanner
downward
slowly and steadily to get the best
quality picture.
6)
Press
SCAN
button to stop scanning.
***
We strongly recommend slide the scanner in
downward direction with steady hand motion to achieve best result
and smooth scan.
