Page 8
www.wolverineairsoft.com
Lubricate the 1x5mm O-ring on
the shaft of the valve housing as
well as the 1.5x18mm O-ring be-
low the threads.
Your REAPER is ready to reas-
semble. Begin by inserting the
cage into the rear of the cyl-
inder. Make sure the 1x19mm
O-ring is to the rear of the cyl-
inder.
Next, insert the nozzle and the
spring into the cage.
Finally, align the nozzle with valve
housing post and push the valve
body into the cylinder. Screw the
two halves of the unit back to-
gether clockwise.
Lubricate the 1x7mm O-ring in-
side the bushing in the front of
the cylinder.
