Page 7
www.wolverineairsoft.com
Begin by disassembling your
REAPER engine by unscrewing
the two halves counterclock-
wise.
Next, disassemble the cylinder
assembly by pushing the nozzle
towards the back of the cylin-
der.
Remove the nozzle cage from
the cylinder. You may need to
tap the cylinder on your hand
or a hard surface to break the
cage free from the cylinder.
Lubricate all five O-rings on the
nozzle cage. There are three
1x19mm O-rings on the outside
of the cage and two 1.2x10mm
O-rings on the inside.
Lubricate the base of the nozzle.
