Wolturnus Buzzard Handbike User’s manual 2019
Adjustment and set-up
Image 16 Left: Display, Right: Controller
6.9 Set-up Display and Controller
The Buzzard can be equipped with an electric Bafang motor and battery, which is an optional extra that is possi
-
ble to choose when ordering a Buzzard. The electric Bafang motor is not possible to fit on an already constructed
Buzzard, it has to be born with it.
If the Buzzard handbike is ordered with a Bafang engine, an Intelligent HMI display from Bafang, which controls
the engine and monitors the battery, will be mounted on the Buzzard handbike.
To Turn On/Off:
To turn on your display press and hold the ”Switch Button” for 2 seconds, in order for power up the display.
To turn off the display press and hold the ”Switch Button” for 2 seconds. If the bike have not been used after 5
minutes, the display will automatic turn off.
Assist Mode Selection:
Change the desired electric support by pressing the up- or down button. Switch between 5 levels of power as
-
sistance. Or use gas pedel to overwrite Power Level Assist.
Make sure not to turn on any electronic compo-
nents on, until driver is all the way in the seat,
failure to do so can course the bike to start wit-
hout a driver and course harm to driver and by-
standers.
WARNING!
For a more comprehensive guide on your Befang
display read ”Display Manual DP C10.UART” or
ask your Wolturnus supplier.
INFORMATION
Switch Button
Up Button
Battery indicator
Speedometer
Distance Traveled
Power Level Assist
Down Button
+
-
i
D
6.10 Battery
The battery for the Bafang engine is mounted on the rear of the handbike, behind the seat.
The Battery has a charge time at approximately 4 hours, and should be charged every two weeks.
The battery should be charged every two weeks,
even though it
is not used, to extend battery life.
INFORMATION
Battery operating temperatures are between 0
O
C
and 40
O
C, and
storage temperatures are -20
O
C
and 70
O
C
INFORMATION
Handbikes
18