40
NOTICE!
Leave the appliance in an upright position for
at least 1 hour
before you connect it to the mains to ensure, that the oil has flowed back
into the compressor.
1.
Remove all packaging materials.
2.
Always secure the appliance using the locking mechanism of the castors.
3.
Clean the appliance thoroughly; see chapter
CLEANING AND MAINTENANCE
.
4.
Do not start the appliance immediately after installation. Wait
at least 1 hour
to
ensure proper operation.
5.
Hang the bottle cages and the side tables on the handle strip; s. fig. below.
3
H
ANDLE STRIP
10
B
OTTLE CAGE
11
S
IDE TABLE
6.
The setting of the temperature can be adjusted manually by pressing the relevant
button until the desired value will be indicated; s. chapter 4.3 S
ETTING OF THE
TEMPERATURES
.
7.
If operation was interrupted, wait
5 minutes
before restart.
8.
The appliance needs some time to balance the temperature when you have
changed the setting before or when you have stored additional beverages in the
appliance. The duration of this period of time depends on the range of the change,
the ambient temperature, the number of beverages and the frequency of lid-
openings. When you set the temperature, these aspects should be taken into
account.
9.
Operate the appliance according to the instructions described in the following
chapters.
NOTICE!
The load capacity of each side table is
max. 3.00 kg
. If you load
a side table with more than 3.00 kg, the stability of the appliance is
endangered.
