36
3. Installation
All dimensions in these chapters are given in
millimetres.
The minimum distances required for proper ventilation can be found in chapter
3.2.2
V
ENTILATION
.
3.1 Unpacking and positioning
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away from children and
pets. CHOKING HAZARD! RISK OF INJURY!
1.
Unpack the appliance carefully. Dispose of the packaging as described in chapter
waste management.
2.
Remove all packaging materials.
3.
The accessories of your appliance can be protected from damage due to
transportation (adhesive tapes etc.). Remove such tapes very carefully. Remove
remains of such tapes with a damp cloth using lukewarm water and a mild
detergent (see also chapter
CLEANING AND MAINTENANCE
).
4.
Do not install the appliance near heat sources such as stoves, radiators, underfloor
heating, etc., or open flames.
5.
Air circulation around the appliance
must
be ensured. The appliance may only
be installed and operated at a distance of
at least 100 mm
to other objects.
6.
Install the appliance in a dry and well-ventilated place. The installation room must
have a floor area of at least 4 m
2
to ensure adequate ventilation if the cooling
system is damaged.
7.
Protect the appliance from direct sunlight.
8.
Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
9.
Always secure the appliance using the locking mechanism of the castors.
10.
The lid of the appliance must open completely and without hindrance.
11.
Check that the appliance and the power cord are not damaged.
12.
Connect the appliance to the mains properly.
