WolfPack 4K IP Streaming Extender
6
⑤
SFP+:
LC port to connect RX or Network Switch with fiber module.
⑥
IR IN:
3.5mm jack to connect an IR receiver for IR routing control.
⑦
IR OUT:
3.5mm jack to connect an IR emitter for IR routing control.
⑧
RS232:
3-pin terminal block for RS232 routing control. Supports point to point
unicast and point to multipoint broadcast configuration.
⑨
AUDIO IN:
3.5mm jack to connect an audio source.
⑩
ETHERNET:
RJ45 port to connect control devices (such as PC) for system control
via software and Ethernet pass-through. The PC can also be indirectly connected
to the network switch.
3.3
HDTV
IPA
1
200D Front Panel
①
POWER LED:
The LED
illuminates red when power is applied.
②
LINK LED:
The LED indicates if Ethernet packets are received. It also indicates if
FPGA SERDES can detect a valid signal.
LED off: Packets are not received and RX SERDES is NOT linked.
LED blinking: Packets are received and the RX SERDES IS linked.
Steady light: Packets are not transmitted and the RX SERDES is linked.
③
HDMI LED:
The LED illuminates green when there is HDMI video output.
1 2 3
