Mounting the Rack Plates to Side Racks
The Rack Plates are designed to fit most brands of side racks made from round, oval or square tubing.
Including: Touratech, SW Motech, Happy Trails, ProCycle Wolfman, GIVI**, and similar.
The Rack Plates use the following parts: See Fig.1
2-Rack Plates
8-Rack Mounts
16-M6 X 30 Stainless Steel Screws
16-M6 Stainless Steel Washers
2-M6 Nylok Nuts
1. Clean the side racks of dirt and grime.
2. Thread washers on to all screws and add a drop of Medium/Blue thread lock to each, 16 in total.
2. Place Rack Plate on rack with the clasp hook facing motorcycle.
2. Center the Rack Plates on the side rack as best possible. Depending on brand and model you may have to move the
rack so as to fit around a mounting point.
3. Take one M6X30 -screw with washer and insert throught the top most Rack Mount slot, thread into the Rack Mount
on the back side around rack.
5. Thread another M6X30 screw through the bottom Rack Mount hole.
