4
II. Mounting the Front Straps to your motorcycle- Two methods.
D.
Using Wolfy Strap Mounts -A1017
.
Install the Wolfy strap mounts.
1. Thread the Front Mounting strap through the slot and back to the buckle. FIG8
FIG8
2.Repeat for the other side. Fig.13 Tighten both sides evenly to secure. Cut off any excess webbing and melt
end with a lighter to avoid unraveling. Leave about 6” of webbing to use when cinching the E-Base tight. Tuck
excess webbing behind buckle.
E. Using the Sub-Frame
1. Thread the front strap under the Sub-Frame and around the frame. FIG9
FIG9
FIG10
2. Repeat for the other side. FIG10 Tighten both sides evenly to secure. Cut off any excess webbing and melt
end with a lighter to avoid unraveling. Leave about 6” of webbing to use when cinching the E-Base tight. Tuck
excess webbing behind buckle.
