3
Fig.10
C. Rear Rack on Bike
. Use Single Rear Strap.
1. Place E-‐Base across the seat and rear rack of your bike. Fig.11
Fig.11
Fig.12
2. Thread the Single web mounting strap through the rear slots in your rack. Fig.11
3. Thread the Single web mounting strap to the buckles, tighten rear Straps to set seat position-‐ **Tip: for more seat
space, position E-‐Base further back on seat and fender. Fig.12
II. Mounting the Front Straps to your motorcycle-‐ Two methods.
D.
Using Wolfy Strap Mounts -‐A1017
.
Install the Wolfy strap mounts.
1. Thread the Front Mounting strap through the slot and back to the buckle. Fig.13
Fig.13
2.Repeat for the other side. Fig.13 Tighten both sides evenly to secure. Cut off any excess webbing and melt end with a
lighter to avoid unraveling. Leave about 6” of webbing to use when cinching the E-‐Base tight. Tuck excess webbing
behind buckle.
