User's Manual Charged Plate Monitor
Part No. 7100.CPM74
_
Page 8 of 10
V0508
5. Voltmeter Mode
5.1
Measuring Voltage
Measuring the voltage can be achieved either by using the plate or by disassembling the
plate and using the
high voltage head
MK11.
5.2
Range Adjustment
See paragraph
how to switch to Voltmeter mode.
Pressing button
«A»
selects the range as shown below for
high voltage head
MK11:
The range is displayed in the upper right (
2kV
in our example)
.
In plate mode the values are double
±100V, ±400V, ±1kV and ±4kV!
PLATE instead of MK11 is indicated in the lower left corner in this case.
5.3
Configuration
Press button
«A»
and
«B»
simultaneously to enter the
set-up
function.
Pressing button
«A»
will start the SETUP. Button
«B»
switches to the ZERO ADJUST menu.
5.3.1 Changing the Mode
Confirm to change the mode.
Press button
«A»
to change.
Toggle the mode with button
«B»
.
MK11:
High voltage head
PLATE:
Plate electrode
5.3.2 Zero Adjust
The Zero adjust menu is displayed when selecting NO in the Set-up (button
«B»
).
Pressing button
«A»
will check the mode.
ZERO ADJUST ?
A<YES NO>B
V-MODE: MK11!
A<OK CHANGE>B
SELECT MODE?
A<YES NO>B
SET_UP ?
A<YES NO>B
V-METER ±2kV
MK11!
0,00kV
