User's Manual Charged Plate Monitor
Part No. 7100.CPM74
_
Page 6 of 10
V0508
Press button
«A»
or
«B»
to decrement the file number.
Important:
Only existing memory locations can be overwritten.
After 3 seconds the display switches back and the values can be stored to the indicated
location by pressing button
«A»
.
4.3
Configuration
Press button
«A»
and
«B»
simultaneously to enter the
set-up
function.
Pressing button
«A»
will start the SETUP. Button
«B»
switches to the ZERO ADJUST menu.
4.3.1 Set-up
The current settings will appear.
Select the mode with button
«B»
, accept the displayed mode with button
«A».
Available modes are
POSITIVE
,
NEGATIVE
and
AUTO
. Auto mode measures positive and
negative in sequence.
Select the start threshold voltage:
Button
«A»
accepts the displayed voltage, button
«B»
changes the value to:
Select the stop threshold voltage:
Button
«A»
accepts the displayed voltage, button
«B»
changes the value to:
Select the time decay for the offset voltage:
STOP: U = 100V
A<OK CHANGE>B
START: U = 1000V
A<OK CHANGE>B
MODE = AUTO
A<OK CHANGE>B
SET-UP ?
A<YES NO>B
FILE NO: XX
A<-10
-1>B
