WOLFF | Eine Marke der Uzin Utz Gruppe | Ungerhalde 1 | D-74360 Ilsfeld | Fon: +49 (0)7062-91556-0 |
Fax: +49 (0)7062-91556-41 |
www.wolff-tools.de
11
Switching the meter OFF
•
To switch-off the device press and hold the button for about 6 Seconds. This is not possible
If you are still in the setup menu.
•
The device can switch-off automatically when this option is selected in the setup
Menu (see paragraph about the setup Menu).
•
In case of a very low battery level potentially causing wrong measurements, the
meter will turn-off automatically. Before it will indicate „Battery low”.
•
Practical tips for the user
The airflow through the sensor cover.
•
The Airhumidity and Airtemperature
Sensors are located behind the cover. It is very important to keep the openings open for free air
circulation to ensure fast and precise measurements.
•
The Airhumidity and Airtemperature Sensors need time to adapt to their environment. Wait at least 2
minutes before taking the readings. This time can be shortened by stimulating the airflow along the
sensors.
•
One of the important features of this device is the calculation of the Dewpoint. If the surface
temperature, measured with the supplied probe, is lower or within 3 degrees Celsius of the calculated
Dewpoint, than condensation may form on the surface. This danger is indicated by blinking of the display
and an acoustic signal.